Clean concrete,
not your equipment.

BETON-X is a biodegradable, glycolic acid-based formula that dissolves hardened concrete, cement residues and mortar — without aggressive mineral acids that damage paint, metal, rubber or glass.
100%
Biodegradable
0%
Harsh Mineral Acids
10–40
Minutes to Work
4
Pack Sizes
No Harsh Mineral Acids100% BiodegradableVery Mild OdorReady to UseSafe on Metal, Glass, PaintEffective on RustIndoor & Outdoor UseFrom 1L to 1000L IBCNo Harsh Mineral Acids100% BiodegradableVery Mild OdorReady to UseSafe on Metal, Glass, PaintEffective on RustIndoor & Outdoor UseFrom 1L to 1000L IBC
The Problem

Traditional acid cleaners damage your assets and your people

BETON-X replaces aggressive hydrochloric and phosphoric acid products that corrode equipment, create health hazards, and harm the environment — using controlled glycolic acid technology instead.
⚠️

Acid corrosion

Traditional removers use HCl that damages paint, corrodes aluminum (up to 55% weight loss), and degrades rubber seals.
💨

Toxic fumes

Hydrochloric acid produces strong, irritating fumes that make indoor or enclosed-space use dangerous.
🌍

Environmental liability

Most mineral acid products are not biodegradable and require special disposal, adding cost and regulatory burden.
✓

BETON-X solves all three

Glycolic acid-based gel. Very mild odor. 100% biodegradable. Controlled cleaning power, dramatically less corrosion.
01

Efficient & Ready-to-Use

Slightly gelled formula that clings to surfaces and dissolves hardened concrete, cement residues, concrete glue, limestone dust, mortar, and calcium deposits. Also effective on rust. No dilution needed.
Ready
Straight from the container
02

Safe for Vehicles & Equipment

Based on glycolic acid — dramatically less corrosive than HCl. Only 0.009% aluminum weight loss vs 55.51% with hydrochloric acid. Safe on painted surfaces, rubber seals, glass and most coatings when used as directed.
0.009%
Aluminum weight loss
03

Biodegradable, Very Mild Odor

100% biodegradable with very mild odor and no harsh fumes, making it suitable for indoor use, tunnels, and enclosed job sites where ventilation is limited. Recommended PPE: gloves, eyewear, protective clothing.
100%
Biodegradable
The Science

Glycolic acid vs
Hydrochloric acid (HCl)

The type of acid used has a major impact on safety, material compatibility and environmental footprint. BETON-X uses glycolic acid — a controlled, effective alternative to aggressive mineral acids.
Property
Glycolic Acid
(BETON-X)
Hydrochloric Acid
(Traditional)
Acid Strength
Moderate (pKa ~3.83)
Very strong (pKa ~ -6)
Odor
Very mild
Strong, irritating fumes
User Safety
Safer handling, lower vapor risk
Highly corrosive, strict PPE
Metal Corrosion
Very low
Very high
Environment
Readily biodegradable
More hazardous
Surface Risk
Lower risk of damage
High risk of etching

Corrosion comparison

% weight loss after exposure — lower is better

Aluminum
0.009%
55.51%
6,168× less corrosion
Carbon Steel
0.17%
2.03%
12× less corrosion
304 Stainless
0.008%
0.53%
66× less corrosion
316 Stainless
0.002%
0.94%
470× less corrosion
Glycolic Acid (BETON-X)Hydrochloric Acid (HCl)
Field of Use

Built for construction
professionals

Concrete trucks & mixers

Remove hardened residue without damage to drum or finish

Concrete pumps & pipes

Keep pump lines flowing and extend equipment life

Hand & power tools

Restore tools to working condition quickly

Scaffolding & formwork

Clean formwork systems for reuse without acid damage

Concrete molds & precast

Maintain precision molds and precast forms

Construction vehicles

Any contaminated surface on heavy machinery
💡 Ideal for regular maintenance cleaning as well as heavy build-up removal.
How It Works

Four simple steps

No special training or equipment required. Spray, wait, rinse.
1

Apply

Apply BETON-X using a low-pressure sprayer, foam lance, or acid-resistant pump sprayer. Create a light layer that adheres to both vertical and horizontal surfaces. Foam application improves contact time.
2

Temperature check

Minimum ambient temperature: +10 °C (50 °F). Lower temperatures increase reaction time. Do not apply on hot surfaces or in direct sunlight.
3

Let it work

Allow 10–40 minutes depending on thickness of residue, age of material, and surface temperature. Do NOT allow the product to dry — keep the treated area wet.
4

Rinse

Rinse thoroughly using a pressure washer. Ensure complete removal of dissolved residues. For heavy build-up, reapply and repeat.
Pro tip: Regular use significantly reduces heavy build-up and cleaning time. Prevention is always cheaper than restoration.
Safety & Compatibility

Safer than mineral acids.
Still treat with respect.

✓
Glycolic acid-based — no hydrochloric or phosphoric acid
✓
Very low corrosion — on most metals and coatings when used as directed
✓
Very mild odor — suitable for indoor and enclosed-space use
✓
100% biodegradable — environmentally responsible by design
✓
Recommended PPE — chemical-resistant gloves, protective eyewear, protective clothing
✓
Do not use on: marble, limestone, polished natural stone, zinc-sensitive untreated metals
Although BETON-X is significantly safer than mineral acid removers, it is still an acidic product. For light metals (aluminum, magnesium alloys): test on a hidden area first, avoid extended contact time, do not let product dry on metal.
Packaging

Every size for every operation

From spot-testing a sample to supplying an entire fleet depot.
1
Litre
Testing, small tools, spot cleaning
5
Litres
Small teams and service vans
20
Litres
Regular on-site use
1000
L IBC
Plants, depots and large fleets
Try Before You Commit

Want to test BETON-X
on your own equipment?

Request a Sample
Partner With Us

Become a BETON-X partner

We work with distributors, rental companies and construction suppliers across Europe and beyond. Tell us about your business and we'll respond with pricing and partnership options within one business day.
→
Competitive wholesale pricing with volume-based tiers
→
Marketing support — product sheets, safety data, branded materials, product samples
→
Dedicated account contact for fast reordering and support

Get in touch

Fill out the form and we'll get back to you within 1 business day.
No spam. We'll only contact you about BETON-X partnership opportunities.